Description

Jaguar Replacement Neck available with Rosewood or Maple fingerboards. With block inlays and binding. These are a drop in replacement for any Fender or Squire Jaguar Guitar. All of our replacement necks are made to order for Tone Merchants to our specs. Standard specs of 9.5″ radius, 22 nickel frets, a 42mm bone nut & a modern C neck profile. Complete with a satin, vintage tint finish. They feel amazing in your hand.

Roasted Maple Necks

In New Zealand we have some very humid and sometimes dry conditions. These fluctuations can cause movement in the neck, requiring some adjustment when weather conditions change.  Roasting necks reduces the amount of moisture in the wood dramatically and for me (Brad) it’s a very practical solution to this problem. It also looks fantastic. Giving your Jaguar Guitar build project or your current Jag some bling and zing!

Satin Vintage Finish

All our replacement necks have a Satin finish with a Vintage Tint. For me this brings out the really nice honey colouring in maple necks & the satin finish gives a smooth, faster feel compared to a Glossy finish.  Particularly for the summer months, a Satin Jag Neck is going to be far less sticky to play.

Jaguar Replacement Neck Specs:

• Suitable replacement necks for MIM, MIJ & Squire Jaguar Guitars.
• Canadian Roasted Maple.
• Maple or Rosewood Fingerboard with Block Inlay & Binding
• Modern C neck profile.
• 9.5″ Radius.
• 22 Nickel frets.
• 42mm bone nut.
• 10mm tuner holes.
• Heel width 55.6mm  (0.5 mm tolerance)
• Vintage satin finish on all maple necks.

Notes:
We are unable to pre-drill the mounting holes into the back of the neck for you. This is because we cannot guarantee that the holes we drill will be a 100% match with those on your guitar body. We recommend that if you are not familiar with replacement neck installation that you contact a qualified luthier or repair shop. You can find a list of luthiers and guitar techs that we recommend in this link.
All guitar necks may require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. Your new neck should be carefully inspected prior to installation and/or modification as necks cannot be returned once altered. Due to the organic nature of wood, each neck is considered unique and may have minor variations in grain or finish from those pictured. Tone Merchants neck heels are made to Fender® USA dimensions and tolerance.
Necks are all made to spec in China for Tone Merchants & are inspected here in Auckland before being listed.  Feel free to contact us if you have any questions. Replacement Necks are only sold within New Zealand. These cannot be sold outside of NZ.
Tone Merchants necks are not “official licensed necks” by Fender®. Tone Merchants has no affiliation with Fender®, in fact we’re not even mates on Facebook.